2
FLOORTEC 480M
1464361000(1)2009-11 A
ENGLISH
USER MANUAL
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
The purpose of this Manual is to provide the operator with all the information to get the best performances from Nil
fi
sk Alto Floortec
480M.
Before operating the machine, read carefully the following information.
The machine here described is intended for commercial use only.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certi
fi
es the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
IDENTIFICATION DATA
The machine Model and Serial Number are shown on the plate on the machine itself.
The machine model year is written in the declaration of conformity and it is also indicated by the
fi
rst two
fi
gures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identi
fi
cation data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
Spare Parts List (supplied with the machine)
–
SPARE PARTS AND MAINTENANCE
Any repair must be performed at authorised Nil
fi
sk Alto Service Centers by quali
fi
ed personnel, which will use original spare parts
and accessories. Contact your Nil
fi
sk Alto Dealer for any repair or service, and specify your machine model and serial number.
CHANGES AND IMPROVEMENTS
Nil
fi
sk Alto constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such bene
fi
ts to the machines that were sold previously.
Any change and/or addition of accessory must be approved and performed by Nil
fi
sk Alto.
UNPACKING/DELIVERY
Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep
the whole packing to have it checked. Contact your Nil
fi
sk Alto Dealer immediately to
fi
le a freight damage claim.
Remove the sweeper from the packing, loosen the knobs (2) and unfold the handlebar (1). Tighten the knobs to fasten the
handlebar.
IMPORTANT SAFETY INSTRUCTIONS
This machine is intended for commercial use only, i.e. hotels, schools, factories, shops and of
fi
ces, that is to say that it is not
intended for domestic use.
Read all the instructions before use.