Squeegee System
58
Service Manual – Scrubtec 337.2 / Vantage 14
Squeegee Blade Check and Replacement
1 Clean the squeegee as shown in the previous
paragraph
2 Check that the front blade (E) and the rear
blade (F) are integral and free from cuts and
lacerations; if necessary replace them. Check
that the front edge (G) of the rear blade is not
worn; otherwise, overturn the blade to replace
the worn edge with an integral one If the other
edges are worn too, replace the blade as shown:
◦
Remove the fastening strap (H) by disengag-
ing it from the fasteners (I)
◦
Replace (or overturn) the rear blade (F), then
reinstall the fastening strap
◦
Remove the fastening strap (J) by disengag-
ing it from the fasteners (K)
◦
Replace (or overturn) the front blade (E),
then reinstall the fastening strap
3 Install the squeegee (B) by carefully inserting
the hooks (L) and the vacuum hole (M) in the
brush deck housings
4 Connect the vacuum hose (A) to the squeegee
A
B
C
D
E
K
F
E
J
D
H
G
J
K
H
I
F
I
C
L
M
P100811