Main Broom System
182
Service Manual – Floortec R 870
Main Broom Lifting Cable Disassembly/Assembly
Disassembly
1
If possible, place the machine on a hoisting system.
2 Remove the main broom
3
Remove the left side broom, if equipped.
4 Remove the fastening screws (A) of the fairing (B) from the steering column
5 Slightly lift the steering column (B) by disengaging it from the lower fastener (C)
6 Disconnect the dust guard system quick coupling (D)
7 Remove the fairing (B)
8
If necessary, drain the water from the tank in the steering column (B), through the filler neck.
9
On the rear side of the steering column, remove the screws (E).
10 Turn the knob (F) counter-clockwise until its screw (G) is removed from the arms (H)
B
D
C
B
A
A
A
A
E
F
G
H
P200180