General Information
11
Service Manual – Floortec R 870
– Do not use the machine if the battery charger cable or plug is damaged If the machine is not
working as it should, has been damaged, left outdoors or dropped into water, return it to the
Service Center
–
Before performing any maintenance procedure, disconnect the battery charger cable from the
electrical mains to avoid any risk of fire, electric shock or injuries.
– Do not smoke while charging the batteries
Guide lines to bacteria control and other dangers coming from the presence of microbes in the Dust-
Guard™ system.
To prevent the operators and other people from developing infections caused by microbes and Legionella that
may flourish in the dust guard system, take the following precautions:
–
If possible, fill the tank with cold water (< 20°C).
–
DO NOT use stagnant water to fill the tank.
–
DO NOT use recycled water, undrinkable water or water that has been in contact with the soil.
–
Adjust and turn the nozzles towards the floor only, from preventing possible inhaling.
– Do not store the machine outdoors or near sources of heat
–
Do not over-fill the tank. Fill the tank sufficiently so that it can be emptied by using the system.
–
Empty the tank every 10 hours or once a week, according to the use.
–
If the machine is not used for more than one week, empty the tank completely, and let it dry.
–
If the tank cannot be cleaned regularly, consider using a biocide that can kill or exert a control
-
ling effect on Legionella bacteria Biocide must be chosen according to the local regulations and
must be used according to the relevant instructions and cautions, to avoid that the personnel
gets affected by dangerous chemical substances
–
If chemical products have to be used in the water tank, it is mandatory to apply the relevant
information and caution labels of the product
Machine Lifting
Warning! Do not work under the lifted machine, if it is not securely fixed.
Machine Transportation
Warning!
Before transporting the machine, make sure that:
All covers are closed.
The tanks are empty.
The battery connector is disconnected.
The machine is securely fastened to the means of transport.