123
38 - Squeegee System
Front Squeegee Blade Reversal or Replacement
1 Remove the suction hose from the squeegee
body and move the hose off to the side
(A)
2 Loosen the two thumbscrews
(B)
that secure
the squeegee assembly to the machine, and
remove the squeegee assembly
3 Loosen the clamping thumbscrew
(E)
that
compresses the retaining strap
(F)
against
the squeegee blade
(G)
and squeegee body
4 Lift the center of the retaining strap
(F)
away from the tabs on the squeegee body,
and slide it out from below
5 Lift the front squeegee blade
(G)
off the
squeegee body
• The squeegee can be rotated and/or flipped
3 times to expose a new edge (4 edges total)
to the lower-front If all 4 edges are worn,
replace the squeegee blade with a new one
6 To replace the blade, align the slots in the
blade with the tabs on the squeegee body
7 Reinstall the retaining strap
(F)
in the
reverse process from removing it
8 Tighten the thumbscrews
(E)
to press the
retainer against the squeegee blade
9 Reinstall the squeegee assembly and perform
the
Squeegee Height and Tilt Adjustment
A
A
B
C
D
E
F
G
