Nilfisk-Advance 50000593, Руководство по обслуживанию, Страница: 51 / 107

Service Manual- AS1050R
14 Wheels System 51
Removal and Installation
Traction Motor (M1)
Removal
1. Drain recovery tank.
2.
Drain solution tank.
3.
Remove brush.
4.
Remove squeegee.
5.
Remove machine’s batteries.
6.
Raise rear wheel off grou nd with jack (A) and support with adequate blocking (Figure 8).
7. Remove screw (B), then remove plain washer (C) and spring washer (D),
remove mechanical brake (E).
8. Cut off nylon cable tie and unplug connector (F).
9. Remove hex screw (G), then remove plain washer (I) and spring washer (H), then
remove screw (K).
10. Remove traction motor (J).
NOTE: Do Not press brake pedal during removal and installation.
Installation
Assemble components in reverse order of disassembly.
Figure 8
Figure 9
A
A
B
B
Figure 10
Figure 11
D
C
E
A
E
F
G
H
I
J
J
K