Nikon Z fc N2016, Справочное руководство

Страница: 400 / 624

B
The setup menu: Camera setup
400
3
Press
4
or
2
to fine-tune autofocus.
･
Choose from values b20 and −20.
･
The current value is shown by
g
, the previously-selected value by
j
.
･
If a zoom lens is attached, you can choose separate fine-tuning
values for maximum angle (WIDE) and maximum zoom (TELE). Use
1
and
3
to choose between the two.
･
The larger the fine-tuning value, the farther the focal point is from
the lens; the smaller the value, the closer the focal point.
4
Press
J
to save the new value.
Choosing a default fine-tuning value
1
Select [AF fine-tuning options] in the setup menu, then
highlight [Default] and press
2
.
2
Press
4
or
2
to fine-tune autofocus.
･
Choose from values b20 and −20.
･
The current value is shown by
g
, the previously-selected value by
j
.
･
The larger the fine-tuning value, the farther the focal point is from
the lens; the smaller the value, the closer the focal point.
3
Press
J
to save the new value.
Non-CPU lens data
G
button
U
B
setup menu
Record data for non-CPU lenses attached using an optional mount
adapter. By registering the focal length and maximum aperture of a non-
CPU lens in the camera, you can display this data as shooting data.