80
Inserting the Battery
Battery Level
•
The battery level is shown in the shooting display and control panel
while the camera is on.
•
The battery level display changes as the battery level diminishes, from
L
through
K
,
J
,
I
, and
H
. When the battery level falls to
H
,
suspend shooting and charge the battery or ready a spare battery.
•
If the message [
Shutter release disabled. Recharge battery.
] is
displayed, charge or exchange the battery.
D
The Standby Timer
The camera uses a standby timer to help reduce the drain on the battery. If
no operations are performed for about 30 seconds, the standby timer will
expire and the monitor, viewfinder, and control panel will turn off. A few
seconds prior to turning off, the monitor and viewfinder will dim. They can
be reactivated by pressing the shutter-release button halfway. The length of
time before the standby timer expires automatically can be selected using
Custom Setting c3 [
Power off delay
] > [
Standby timer
].
Monitor
Viewfinder
Control panel
Содержание Z 9
Страница 153: ...153 Release Mode A Setting the Timer To choose the timer duration press and hold the c button and rotate a command dial ...
Страница 275: ...275 Creating Retouched Copies 3 Highlight the desired size and press J A copy will be saved at the selected size ...
Страница 815: ...815 Camera Displays Video Mode 2 1 1 Exposure compensation value videos 0143 2 Available recording time 0578 ...
Страница 906: ...906 Bluetooth and Wi Fi Wireless LAN A Certificates ...