18
Transfer, Control, and HTTP
Wi
re
le
ss
Co
n
n
e
c
ti
o
n
s
Step 1: Readying the Equipment
After starting the computer and logging in, ready the camera and
WT-7 as described below.
1
Insert a memory card.
Turn the camera off and insert a memory card (do not turn the
camera off while data are being transferred to the computer).
This step can be omitted in camera control mode (
7).
2
Attach the WT-7 (
4).
3
Turn the camera on.
Rotate the power switch to turn the camera on.
4
Press the power switch for about a
second to turn the WT-7 on.
Power switch