Nikon WT-6, Руководство пользователя

Страница: 33 / 64

19
❚❚
Image Transfer, Camera Control, and HTTP Server
If you choose any of the above options in Step 4 on page 9, follow
the steps below to connect to an existing network. Where you will
start depends on the option selected in Step 6 on page 10: if you
selected an option other than
Direct (access point) , start at
Step 1; otherwise, proceed to Step 2, below ( Image transfer or
Camera control ), or to Step 5 on page 21 ( HTTP server ).
1
Obtain or select an IP address.
Highlight one of the following options
and press
J
.
• Obtain automatically : Select this option if
the network is configured to supply the
IP address automatically.
• Enter manually : When prompted, enter an IP address and
subnet mask by pressing
4
and
2
to highlight segments
and
1
and
3
to change. Press
J
to proceed when entry is
complete.
2
Confirm the IP address.
The camera IP address will be displayed
as shown at right; press
J
. If Image
transfer or Camera control is selected,
proceed to Step 3; otherwise, proceed to
Step 6.