Nikon Total Station DTM-322, Инструкция по эксплуатации

Страница: 88 / 185

4 Applications
74 Total Station DTM-322 Instruction Manual
Measuring distance and offset values on the vertical plane
1. To enter the 2-Pt Reference Plane function, press
[6]
or select
V-Plane
in the Programs menu.
2. Enter two points to define the plane.
To enter the point by direct measurement, press
the
MsrPT
softkey.
When you press the
MSR
softkey, a temporary
observation screen appears.
3. Press
[MSR1]
or
[MSR2]
. The Record PT screen
appears.
4. Enter a value in the PT and CD fields. Press
[ENT]
.
5. Enter the second point on the vertical plane.
Press
[ENT]
.
Once the plane is defined, the calculated Sta and dZ
values are updated as you move the telescope. No
distance measurement is required.
Sta Horizontal distance from P1 to the target point
along the baseline
dZ Vertical distance from P1 to the target point
Baseline