Nikon Total Station DTM-322, Инструкция по эксплуатации

Страница: 108 / 185

5 Menu Key
94 Total Station DTM-322 Instruction Manual
When you have entered three points, the
instrument calculates the angle and distances.
5. Do one of the following:
–
To return to the Inverse menu, press
[ENT]
.
–
To return to the Input BasePt screen, press
[ESC]
.
Calculating and manually inputting coordinates
To enter the Input menu, press
[2]
or select
Input
in
the Cogo menu. There are three functions in this menu
for recording new coordinate points.
HD input
To calculate a coordinate by an angle and distance
input from the base point (P1), press
[1]
or select
AZ+HD
in the Input menu.
Enter the base point (P1). Type the point name and
press
[ENT]
.
Enter the azimuth, horizontal distance, and vertical
distance. Then press
[ENT]
.
To enter 123°45'45", type 123.4545 and press
[ENT]
.
If you do not enter a value in the dVD field, the value
0.0000 is used.
A recording point screen with the calculated
coordinates appears. PT defaults to the last recorded
PT + 1.
Press
[ENT]
to store the point.