Nikon SB-800 Скачать руководство пользователя

Страница: 70 / 132

Using the Quick Recycling Battery Pack SD-800

Use the provided quick recycling battery pack to install five batteries to shorten
the recycling time (p. 19).

Notes on using the Quick Recycling Battery Pack SD-800

• With the SD-800 attached, be sure to use five batteries.
• Be sure to replace all five batteries, including the one in this pack and

the four inside the SB-800, with fresh ones at the same time.

• Do not mix battery brands or types, or use old with new batteries.

Otherwise, the batteries may leak corrosive liquids, become hot, or
explode.

• This battery pack cannot be used when the Power Bracket Unit

SK-6/SK-6A is attached to the SB-800.

• The battery chamber lids for the SB-800 and SD-800 are identical.

■

Attaching the Quick Recycling Battery Pack SD-800

Slide the SB-800’s battery chamber lid in the
direction of the arrow to open.

Push the battery chamber lid back in the direction
of the arrow to remove it.

• The lid can be easily removed if pushed back past

the perpendicular position.

WARNING

Battery chamber lid

Battery chamber lid
attachment index

Quick recycling battery
pack lock switch

Содержание SB-800





































































































































Результаты поиска

Содержание SB-800

Отзывы:

Похожие инструкции для SB-800

Бренды по названию

Популярные бренды

Nikon SB-800, Инструкция по эксплуатации

Результаты поиска

Содержание SB-800

Отзывы:

Похожие инструкции для SB-800

Бренды по названию

Популярные бренды