Nikon S5100, Руководство пользователя

Страница: 45 / 180

33
Bas
ic Ph
otography an
d Pl
ayba
ck
:
A
(Auto)
M
o
de
Macro Mode
Macro mode is used for taking pictures of objects as close as 2 cm (0.8 in.). Note
that the flash may be unable to light the entire subject at distances of less than
50 cm (1 ft. 8 in.).
1
Press the multi selector
p
(macro mode).
The macro mode menu is displayed.
2
Press the multi selector
H
or
I
to choose
ON
and press the
k
button.
The macro mode icon (
F
) is displayed.
If a setting is not applied by pressing the
k
button
within a few seconds, the selection will be canceled.
3
Rotate the zoom control to frame the picture.
The closest distance at which the camera can focus varies
depending on the zoom position.
When the zoom is at a position where
F
and the zoom
indicator glow green (to the left of
G
), the camera can
focus on subjects as close as 4 cm (1.6 in.) from the lens. When the zoom is fully zoomed
out, the camera can focus on subjects as close as 2 cm (0.8 in.) from the lens.
Macro mode
C
Autofocus
When using
A
(auto) mode, if
Autofocus mode
(
A
48) is set to
Full-time AF
, the camera focuses
continuously until the shutter-release button is pressed halfway to lock the focus. Therefore, the
sound of lens drive movement can be heard.
When using other shooting modes,
Full-time AF
is turned on automatically when macro mode is
turned on.
C
The Macro Mode Setting
The macro mode setting applied in
A
(auto) mode is saved in the camera’s memory even after the
camera is turned off, and reapplied the next time
A
(auto) mode is selected.