Nikon P-400R Скачать руководство пользователя страница 91

Страница: 91 / 115

P-400R Digital Microscope Instructions

Chan

ging Se

ttings

7.1

Adjusting the Brightness of the LCD Monitor

You can adjust the brightness of the LCD monitor. The procedure is as follows.

Display the [Setup menu] screen.

Select [Monitor brightness], and then

press the [OK] (or right) button.

The [Monitor brightness] screen appears.

Use the top and bottom buttons of the

multi-selector to select the brightness
level (1 to 5) of the LCD monitor.



1 (darkest) to 5 (brightest)
(initial setting: 3)

Determine the level, checking the display
of the chart.

Press the [OK] (or right) button to apply

the selected brightness level.

The [setup menu] screen appears again.

7.2

Adjusting the Volume of the Operation Sound

You can adjust the volume of the startup, operation, and shutter sounds. The
procedure is as follows.

Display the [Setup menu] screen.

Select [Sound volume], and then press

the [OK] (or right) button.

The [Sound volume] screen appears.

Use the top and bottom buttons of the

multi-selector to select the volume
level.



Loud, Normal, Soft, OFF
(initial setting: Normal)

Sounds will be emitted at the selected
volume level.

Press the [OK] (or right) button to apply

the selected volume level.

The [Setup menu] screen appears again.

Содержание P-400R




















































































































Результаты поиска

Содержание P-400R

Отзывы:

Nikon P-400R, Инструкция по эксплуатации, Страница: 91 / 115

Результаты поиска

Содержание P-400R

Отзывы: