Nikon P-400R, Инструкция по эксплуатации, Страница: 90 / 115

P-400R Digital Microscope Instructions
74
7
Chan
ging Se
ttings
Restarting shooting/playback mode
From the setup menu, to place the P-400R in playback mode again, press the
capture switch. To place it in playback mode again, press the playback button (
).
Pressing the [MENU] button places the P-400R in the previous mode again.
Operations that can be performed using the setup menu
The following table describes the operations that can be performed by using the
setup menu.
Table: Operations that can be performed using the setup menu
Section Item Description Page
7.1
Adjusting the Brightness of
the LCD Monitor
The brightness of the LCD monitor
can be selected from five levels. The
brightness can be adjusted by
checking the gray scale.
75
7.2
Adjusting the Volume of the
Operation Sound
The volume of the sound emitted
when the P-400R is turned on or an
operation is performed can be
selected from Loud, Normal, Soft,
and OFF.
75
7.3
Selecting the Video Output
Signal Format
The format of video output signal can
be selected from NTSC, PAL, and
OFF.
76
7.4
Selecting the Shutter
Release Method
Whether the capture switch on the
P-400R or the optional external
release switch (P-RELS) is used to
release the shutter can be selected.
76
7.5 Initializing an SD Card
The SD card inserted in the P-400R
can be initialized.
77
7.6
Setting the Automatic Power
Save Function
The P-400R can automatically enter
standby mode if no operation is
performed for a length of time. The
time can be specified from the setup
menu.
77
7.7 Selecting the Language
The language of the text displayed in
the LCD monitor can be selected
from English and Japanese.
78
7.8
Setting the Current Date and
Time
The current date and time can be set. 78
7.9
Checking the Version
Information The version information of the
P-400R firmware can be displayed.
79
7.10 Restoring the Initial Settings
The P-400R settings can be
initialized to the factory default
settings.
80