Nikon P-400R Скачать руководство пользователя страница 62

Страница: 62 / 115

P-400R Digital Microscope Instructions

Basic Operations for Capturing an

d Playing Back

4.6

Deleting Captured Images

4.6.1

Deleting the image that has just been captured

To delete the last image captured in shooting mode, perform the following procedure.

In shooting mode, press the delete

button ( ).

The last saved image and a message
asking you whether you really want to
delete the image are displayed in the LCD
monitor.

Shooting mode

Use the top and bottom buttons of the

multi-selector to select [Yes] or [No].

Press the [OK] button or the right

button of the multi-selector to apply the
selection.

If you selected [Yes], the image is deleted
and a completion message is displayed for
two seconds.
The live image appears again.

When no images have been saved

When no images have been saved, if you press the delete button ( ), the
message “No image” is displayed, and the live image is displayed.

LCD panel

Delete button

[OK] button

Содержание P-400R




















































































































Результаты поиска

Содержание P-400R

Отзывы:

Nikon P-400R, Инструкция по эксплуатации, Страница: 62 / 115

Результаты поиска

Содержание P-400R

Отзывы: