Nikon P-400R Скачать руководство пользователя страница 109

Страница: 109 / 115

P-400R Digital Microscope Instructions

Daily Maintenance

10.3

Cleaning Painted, Printed, or Plastic Parts



If these parts become excessively dirty, wipe them gently with a piece of gauze

slightly soaked with diluted neutral detergent.



Do not apply any organic solvent (such as alcohol, ether, or paint thinner) to

painted parts, plastic parts, and printed parts. These substances may cause
discoloration or peeling of the printed matters.

10.4

Storage



Store this product in a location with low humidity where mold is unlikely to form.



During storage, place a plastic cover over the equipment to prevent dust

accumulation.

10.5

Periodic Inspections (Charged)

Periodic inspections are recommended in order to maintain the performance of this
product. Consult your Nikon representative for details about periodic inspections.

Содержание P-400R




















































































































Результаты поиска

Содержание P-400R

Отзывы:

Nikon P-400R, Инструкция по эксплуатации, Страница: 109 / 115

Результаты поиска

Содержание P-400R

Отзывы: