Nikon P-400R Скачать руководство пользователя страница 108

Страница: 108 / 115

P-400R Digital Microscope Instructions

Daily Maintenance

Daily Maintenance

To prolong the performance of this product, it is recommended to perform daily
maintenance as described below.

Cleaning utensils and consumables



Cleaning utensils

Soft-tip brush (or a clean-room wiper in the clean room environment)



Consumables

Ethyl or methyl alcohol
Lens tissue (or a clean-room wiper in the clean room environment)

10.1

Cleaning the Lens

Do not let stains, such as dust or fingerprint, get on the surface of the lens. Such
stains degrade the view of images. If the lens becomes dirty, clean it as described
below.



Brush away the dust with a soft-tip brush or gently wipe it away with a piece of

gauze.



Only if the lens become dirty with fingerprints or grease stains, slightly dampen a

piece of soft, clean cotton cloth, lens tissue, or gauze with absolute alcohol (ethyl
or methyl alcohol) and gently wipe away the stains.

Since absolute alcohol is highly flammable, be careful in handling it so that it

does not ignite.

Observe the manufacturer’s handling instructions when handling absolute

alcohol.

10.2

Cleaning the LCD Panel



If the LCD panel is dirty, wipe it gently with a soft clean cotton cloth, a lens tissue,

or gauze.



Only if the lens become dirty with fingerprints or grease stains, slightly dampen a

piece of soft, clean cotton cloth, lens tissue, or gauze with absolute alcohol (ethyl
or methyl alcohol) and gently wipe away the stains.

Since absolute alcohol is highly flammable, be careful in handling it so that it

does not ignite.

Observe the manufacturer’s handling instructions when handling absolute

alcohol.

Содержание P-400R




















































































































Результаты поиска

Содержание P-400R

Отзывы:

Nikon P-400R, Инструкция по эксплуатации, Страница: 108 / 115

Результаты поиска

Содержание P-400R

Отзывы: