Nikon NPL-632, Инструкция по эксплуатации

Страница: 87 / 206

Field Station NPL-632 Instruction Manual 73
Applications 4
Advanced feature: Specifying a stakeout list by range input
1. To input points by range, press the
Fr/To
softkey in the PT field.
2. Enter the start point (Fr) and the end point (To).
The range between Fr and To must be less than
1001 points.
If existing points are found between Fr and To, a
point list appears.
To highlight a point, press
[^]
or
[v]
. To go to the
stakeout observation screen, press
[ENT]
.
If you have assigned a control job, and
additional points are found in the control job, the
Ctrl
softkey appears under the list.
DivLine S-O
This function divides the line between the instrument and the first target by an input
span number. It then guides you to stake out the points, one by one.
1. Press
[3]
or select
DivLine S-O
in the Stakeout
menu.
2. Set up the baseline. To do this, sight the target on
the line (the end point) and press
[MSR1]
or
[MSR2]
.
3. Enter the total stake number in the Span total
field.