Nikon NPL-632, Инструкция по эксплуатации

Страница: 143 / 206

Field Station NPL-632 Instruction Manual 129
Menu Key 5
You can edit any field in the ST record, but the
instrument does not recalculate any measurements
from this station.
Press
[ENT]
in the AZ field to confirm the change.
Searching records
You can search for records by their type, point name, code, or by any combination of
these values.
Searching raw records
In the RAW screen, press the
Srch
softkey to access
the raw data search function.
To find a point by name, enter the name in the PT field
and press
[ENT]
twice.
You can use the asterisk (*) as a wildcard. For
example, when you enter
30*
in the PT field, the
search matches the points named 300, 301, 302,
3000A2, and 3010.
If you change the ST or HI values, the coordinates of observation points are not recalculated. A comment record
is stored to record the change. The following example shows a comment record for a changed HI value:
CO,HI changed at ST:9012 Old HI= 1.3456m
If you change the BS or AZ values, raw records are not recalculated. A comment record is stored to record the
change.
To search by point type, move to the Type field and use
[<]
or
[>]
to change the
selected point type. The options are ALL, ST, SS, SO, CP, CO, CO(SY), and
CO(RDM).
If you selected ST, SO, F1, or F2 in the Type field, you do not have to enter a value in the CD field. Press
[ENT]
in the PT field to start the search.
If you selected CO, CO(SY), or CO(RDM) in the Type field, you cannot enter a value in the PT or CD fields.
Press
[ENT]
in the Type field to start the search.