Nikon NPL-632, Инструкция по эксплуатации

Страница: 134 / 206

5 Menu Key
120 Field Station NPL-632 Instruction Manual
Recording
To open the Rec menu, press
[8]
or select
Angle
in the
Settings menu.
Others settings
To open the Others menu, press
[9]
or select
Other
in
the Settings menu.
Store DB RAW / XYZ / RAW+XYZ
This setting determines whether raw
and/or coordinate data is stored
when you record SS, CP, or SO
records in the Basic Measurement
Screen (BMS) or Stakeout screen
Rec LG
ON/OFF
If you set this field to ON, when you record a point from the BMS, the
Lumi-guide is turned on for two seconds.
Data Rec Internal / COM
Set this field to COM to output data on the COM port when you press
[ENT]
in the BMS or a Stakeout screen. The data is not stored to the job
file. For more information, see Outputting data to the COM port,
page 87 .
XYZ disp Fast / Norm / Slow / +ENT
Defines speed to move to the next
screen after showing XYZ of the
input PT
2nd Unit
None / Meter / US-Ft / I-Ft
When the Secondary unit is set to a unit, an extra display screen is
available in the BMS, stakeout observation screens, and 2-pt reference
line screens. The extra screen shows the HD, VD, and SD in the
secondary unit
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or Ft-Inch.
Sig Beep ON / OFF
Split ST
No / Yes
Select Yes to separate the point numbers of station points from other
record type point numbers
If you set the Split ST field to Yes, an additional setting screen appears. Use
this screen to specify the starting ST number.