Nikon NPL-632, Инструкция по эксплуатации

Страница: 102 / 206

4 Applications
88 Field Station NPL-632 Instruction Manual
Measuring Offsets
Measuring taped offsets
1. To enter the taped offset function, press
[1]
or
select
Tape
in the Offset menu.
If you have not taken a distance measurement
before entering this function, a temporary
measurement screen appears.
2. Sight the target and then press
[MSR1]
or
[MSR2]
.
3. Enter offset distances from the measured point.
Use
[^]
or
[v]
to move to the appropriate offset
field.
You can enter any combination of taped offset
distances to specify the point.
4. To go to the recording PT screen, press
[ENT]
in
the last field.
The calculated coordinates are shown.
5. Enter a PT (and CD) value.
6. Press
[ENT]
to record the point.
Raw data is also recalculated, based on the taped
offset value.
Left (-)
In (-)
Up (+)
Out (+)
Down (-)
Right (+)