Nikon NPL-322, Инструкция по эксплуатации

Страница: 59 / 197

Total Station NPL-322 Instruction Manual 45
Getting Started 3
Recording an instant measurement
You can also input a point by recording an instant
measurement. To do this, press the
MSR
softkey.
An observation screen appears.
Press
[MSR1]
or
[MSR2]
to start a measurement. To change
the height of the target, press the
HT
softkey.
To go to the point recording screen when you have
finished the measurement, press
[ENT]
.
Enter the point or code name. Press
[ENT]
.
Entering a point from the stack
The point stack is a list of recently used points. To
display the stack, press the
Stack
softkey when the
cursor is in the PT field.
Use
[^]
or
[v]
to move the cursor to the point that you
want to use. Then press
[ENT]
.
When you return to the point input screen, the selected
point name is entered in the PT field, incremented by
one. For example, if you selected the A101 point,
A102 appears in the PT field.
When you move the cursor to a field, the current or default value appears in
inverted text (this is the default “Replace All” input mode).
Press
[>]
to change the input mode to Overwrite mode and highlight the first
character. Press
[<]
to move the cursor the end of the string.
The stack shows the last 20 point names used, in chronological order from last used to first used.