Nikon NPL-322, Инструкция по эксплуатации

Страница: 51 / 197

Total Station NPL-322 Instruction Manual 37
Getting Started 3
For example, when you press
[6]
, the code
assigned to 6 is selected, and the instrument
starts a measurement.
3. If you have set the record mode to Confirm (see
Measurement settings, page 52 ), the Record PT
screen appears after each measurement.
Do one of the following:
–
To record the point, press
[ENT]
.
–
To return to the BMS, press
[ESC]
.
4. To return to the BMS from the Qcode screen, press
[MODE]
or
[ESC]
.
[COD]
key
In the BMS, press
[COD]
to change the default feature code that will appear in the CD
field when you record a point.
Setting the default code
When you press
[COD]
in the BMS, a window for
entering the feature code appears.
You can use the
List
and
Stack
softkeys to enter the
code.
Qcode observations
To enter the Quick code observation routine, press the
Qcode
softkey.
In this function, you can use the ten numeric keys to
both select a feature code and shoot a point.
To change the measurement mode for the Quick code
observation, press the
Sett
softkey.
To assign a new feature code to a numeric key, press [
^]
or
[v]
to highlight the code that you want to change. Then
press the
Edit
softkey.
You can use the DSP softkey to change the values shown in the measurement box, in the same way as you use
the
[DSP]
key in the Basic Measurement Screen (BMS).
In Quick code measurement, the Rec mode can only be set to Confirm or ALL.