Nikon N1933, Справочное руководство, Страница: 705 / 778

663
Caring for the Camera
Image Sensor Cleaning
Dirt or dust entering the camera when lenses are exchanged or
the body cap is removed may adhere to the surface of the
image sensor and affect your photographs. The “clean image
sensor” option vibrates the sensor to remove dust.
The image sensor can be cleaned at any time from the menus,
or cleaning can be performed automatically when the camera is
turned off. If image sensor cleaning fails to resolve the problem,
contact a Nikon-authorized service representative.
❚❚
Using the Menus
•
For maximum effect, hold the camera
in normal orientation (base down).
•
Select [ Clean image sensor ] in the
setup menu, then highlight [ Clean
now ] and press J to begin cleaning.
•
Camera controls cannot be used while
cleaning is in progress. Do not remove
or disconnect the power source.
•
The setup menu will be displayed when cleaning is complete.