Nikon KEYMISSION 170, Справочное руководство

Страница: 53 / 133

34
Movies
Operations During Movie Recording
Capturing Still Images During Movie Recording
When recording a movie, you can save one frame
as a still image by pressing the photo button on
the remote control while the icon for still image
shooting is displayed. Movie recording continues
while the still image is being saved.
•
The size of captured still images is 2 megapixels
(1920 × 1080).
B
Notes About Capturing Still Images During Movie Recording
•
Still images can be captured when using the movie modes indicated below.
- Standard movie or Loop recording (when Movie options is set to 1080/30p or
1080/60p , or 1080/25p or 1080/50p )
- Superlapse movie
•
Still images cannot be saved during movie recording when the remaining movie
recording time is less than five seconds.
•
The frames of a movie that were recorded when a still image was being captured may not
play back smoothly.
Adding Tags During Movie Recording (Highlight Tags)
You can add tags while recording a movie by pressing the
w
button on the remote
control (default setting). You can use the tags as a guide to quickly find a particular
scene when playing back the movie (
A
45), or you can easily create a highlight
movie based around the tags. The tags can also be used as a guide when editing the
movie in the camera (
A
47).
B
Notes About Using the
w
Button
Make sure that
Insert highlight tag
is selected for the
Remote Fn button
(
A
75) setting
in Camera settings in the
c
(setup) menu.
B
Notes About Restrictions for Adding Tags During Recording
•
Tags cannot be added when recording a superlapse movie or time-lapse movie.
•
A maximum total of 30 tags can be added to each movie recording.
C
Using the Camera Buttons During Movie Recording
You can configure settings that enable the camera buttons to capture still images or add
tags during movie recording (
A
74).
[01:00:00]
1080/30
p
REC