Nikon Forestry Pro II, Инструкция по эксплуатации

Страница: 12 / 56

12
En
Fr
• Operating the MODE button
There are two ways to press the MODE button. Operate the button while following the descriptions in this manual.
- “Press and hold” means to continue pressing the button for 1.5 seconds or longer.
- “Press” means to press the button quickly (less than 1.5 seconds).
„ „
Changing the distance display unit (F1)
For the display unit of the measurement results, select YD (yards), ft (feet), or m (meters). Factory default
setting is YD (yard).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
• You can now change the distance display unit.
3. The setting switches every time you press the PWR button.
F1 UNIT: [ m ] F1 UNIT: [ YD ] F1 UNIT: [ ft ]
Internal display
External display
• If you press and hold the MODE button or do not operate
the buttons for about 30 seconds, the displayed setting is
saved and the Laser Rangefinder returns to standby. If you
do not operate the buttons for about another 30 seconds,
the Laser Rangefinder turns off.
• The setting is saved even when the Laser Rangefinder is
turned OFF.
Internal display External display
Navigating the menus