Nikon DTM-302 Series, Инструкция по эксплуатации

Страница: 219 / 222

Error Messages 10
Total Station DTM-302 Series Instruction Manual 201
Searching
10.8
PT Not Found
108.1
There is no point that matches the criteria you entered.
Press any key to return to the point input screen.
This message may appear in any function where the PT/CD is input, such as Station
Setup or Stakeout.
Settings
10.9
Job Settings will be changed
109.1
You have changed one or more of the following job settings:
• VA zero or HA in the Angle screen (see Angle, page 127)
• Scale, T-P, Sea Lvl, or C&R in the Distance screen (see Distance, page 128)
• Coord or Az Zero in the Coordinates screen (see Coordinate, page 130)
• Angle, Dist, Temp, or Press in the Unit screen (see Unit, page 131)
Note – To record a point using the new settings, create a new job using the new
settings.
Stakeout
10.10
Input Error
1010.1
The point name style used in the Fr field is not the same as the style used in the To
field. For example, the Fr field style is 1, and the To field style is A200.
Press any key to return to the Fr/To input screen. Then re-enter the point name,
using the same naming style in both fields.
To ... Press ...
discard the changes to the job settings [ESC] or the
Abrt
softkey. The
current job remains open.
close the current job and save the changes
to the job settings [ENT] or the
OK
softkey