Nikon DTM-302 Series, Инструкция по эксплуатации

Страница: 129 / 222

Menu Key 5
Total Station DTM-302 Series Instruction Manual 111
– To cancel the deletion and return to the previous screen, press [ESC] or the
Abrt
softkey.
After you delete a job, the display returns to
the job list.
Setting the control job
50.1
If you search for a point when a control job is specified, and the system cannot find
the point in the current job, the control job is also searched. If the point is found in
the control job, it is copied to the current job as a UP record.
A control job has the same format as a standard job. You can open and modify it like
any other job, and you can use it to record any measured data.
To set the control job:
1. Highlight the job that you want to use.
2.
Press the
Ctrl
softkey.
A confirmation screen appears.
3.
Do one of the following:
– To set the selected job as the control job,
press
[ENT] or the
Yes
softkey.
– To cancel the process, press [ESC] or the
No
softkey.
If a control job is already assigned, the newly
assigned control job replaces it as the control job.
To clear the control job selected, highlight the
current control job in the job list and press the
Ctrl
softkey. Then press
[ENT]
or the
Yes
softkey to confirm.