Nikon D610, Руководство пользователя

Страница: 269 / 368

243
U
9
Framing grid
Press the Fn button and rotate the main command dial to turn the framing
grid display in the viewfinder on or off ( 0 8).
5
Choose
image area Press the Fn button and rotate a command dial to choose an image area
( 0 89).
m
Viewfinder
virtual
horizon
Press the Fn button to view a virtual horizon display in the viewfinder.
n
MY MENU Pressing the Fn button displays “MY MENU” ( 0 280).
6
Access top
item in MY
MENU
Press the
Fn
button to jump to the top item in “MY MENU.” Select this
option for quick access to a frequently-used menu item.
v
1 step spd/
aperture
If the Fn button is pressed when the command dials are rotated, changes
to shutter speed (modes
S
and
M
) and aperture (modes
A
and
M
) are made
in increments of 1 EV, regardless of the option selected for Custom Setting
b2 (
EV steps for exposure cntrl ,
0
224).
w
Choose non-
CPU lens
number
Press the
Fn
button and rotate a command dial to choose a lens number
specified using the Non-CPU lens data option (
0
172).
K
Playback
Fn button performs same function as K button. Select when using a
telephoto lens or in other circumstances in which it is difficult to operate
the
K
button with your left hand.
None Pressing the button has no effect.
A
Viewfinder Virtual Horizon
When Viewfinder virtual horizon is selected for Custom Setting f2 ( Assign Fn button ),
pressing the Fn button converts the exposure display in the viewfinder to a roll indicator.
Press the button again to restore the indicator to its normal function.
Camera tilted right Camera level Camera tilted left
Viewfinder
Note that the display may not be accurate when the camera is tilted at a sharp angle forward
or back. For a display that shows both pitch and roll, use the
Virtual horizon option in the
setup menu ( 0 258).
Option Description