430
n
Attaching a Power Connector and AC
Adapter
Turn the camera off before attaching an optional power connector
and AC adapter.
1
Remove the battery-chamber cover.
Lift the battery-chamber cover latch, turn
it to the open (
A
) position (
q
), and
remove the BL-6 battery-chamber cover
(
w
).
2
Connect the AC adapter.
Pass the DC cable over the power
connector cable guide (
q
) and slide it
down until it is at the bottom of the slot,
and then insert the DC plug into the DC IN
connector (
w
).
3
Insert the power connector.
Fully insert the power connector into the
battery chamber as shown.