170
r
3
Select a preset.
Press the
U
button and rotate the sub-command dial until
the desired white balance preset (d-1 to d-6) is displayed in
the rear control panel.
4
Select direct measurement mode.
Release the
U
button briefly and then
press the button until the
L
icon in
the rear control panel starts to flash. A
flashing
D
will also appear in the top
control panel and viewfinder.
5
Measure white balance.
In the few seconds before the indicators stop
flashing, frame the reference object so that it fills the
viewfinder and press the shutter-release button all
the way down. The camera will measure a value for white
balance and store it in the preset selected in Step 3. No
photograph will be recorded; white balance can be measured
accurately even when the camera is not in focus.
U
button
Sub-command dial
Rear control panel
Top control panel
Rear control panel
Viewfinder