36
Scene Mode (Shooting Suited to the Shooting Conditions)
C
Time Remaining
You can check the time remaining until shooting
automatically ends on the screen.
•
If you select
Underwater
, screens about recording of location data and water depth
calibration are displayed followed by messages about waterproofing. The next message is
displayed when you press the multi selector
K
after reading the messages. When the
shutter-release button is pressed, the camera switches to shooting mode without
displaying any subsequent screens.
•
See “<Important> Notes About Shockproof, Waterproof, and Dustproof Performance and
Condensation” (
ix) for more information on shooting underwater.
•
Wireless communication is not available when the camera is underwater.
C
Underwater Recording of Location Data
The screen on the right is displayed if you select
Underwater
scene mode or select
o
(scene auto
selector) mode and then submerge the camera
underwater while positioning is being performed or while
location data is being downloaded from a smart device.
If you select
Yes
and press the
k
button, the location data
obtained prior to underwater shooting is recorded on the
images to be shot underwater.
C
Underwater
1 0 m 0 s
1 0 m 0 s
End recording
Underwater
Yes
No
Do you want to use the location data
last obtained before submerging?
These data will be recorded with
ever y shot taken until you resur face.
