Nikon Coolpix P610, Справочное руководство

Страница: 74 / 238

52
Fu
nct
io
n
s T
h
at
Can
Be Se
t w
ith
th
e
d
(Me
n
u)
Bu
tton
Metering
Allows you to set the method that the camera uses
to measure the brightness of the subject.
• Default setting: Matrix
E
65
Continuous
Allows you to select single or continuous shooting.
• Default setting: Single
E
66
ISO sensitivity
Allows you to control the camera’s sensitivity to light.
• Default setting: Auto
When Auto is selected,
E
is displayed in the
monitor while shooting if ISO sensitivity increases.
• In
m
(manual) mode, when set to Auto or Fixed
range auto , the ISO sensitivity is fixed at ISO 100.
E
70
Exposure
bracketing
The exposure (brightness) can be changed
automatically during continuous shooting.
• Default setting: Off
E
71
AF area mode
Allows you to change the method of how the
camera selects the focus area for autofocus.
• Default setting: Target finding AF
E
72
Autofocus mode
Allows you to select either Single AF , which focuses
only when the shutter-release button is pressed
halfway, or
Full-time AF , which continues focusing
even when the shutter-release button is not pressed
halfway.
• Default setting: Full-time AF
E
75
Flash exp. comp.
Allows you to adjust the flash output.
• Default setting: 0.0
E
75
Noise reduction
filter
Allows you to set the strength of the noise reduction
function that is normally performed when saving
images.
• Default setting: Normal
E
76
Active D-Lighting
Allows you to prevent loss of contrast details in
highlights and shadows to make the contrasts in
images match what you see with your eyes.
• Default setting: Off
E
76
Multiple
exposure
Allows you to combine two to three images and save
them as a single image.
• Default setting:
- Multiple exposure mode:
Off
- Auto gain: On
E
77
Save user
settings Allows you to save the current settings in mode dial
M
(
A
34).
35
Option Description
A