Nikon COOLPIX AW100, Справочное руководство

Страница: 155 / 242

E
35
The Shooting Menu (
A
(Auto) Mode)
Re
feren
ce
S
ect
io
n
Using Preset Manual
Use when white balance setting ( Auto , Incandescent , etc.) may not produce the
desired results, such as when shooting under unusual lighting conditions (e.g.,
when you want to make pictures taken under lamps with reddish-light look as
though they were shot in normal light).
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1
Place a white or gray reference object under the lighting that will be
used during shooting.
2
Display the shooting menu (
A
51), use the
multi selector to set White balance to
b
Preset manual , then press the
k
button.
• The lens extends to the zoom position for
measurement.
3
Choose Measure .
• To apply the most recently measured white balance
value, select
Cancel and press the
k
button. The most
recently measured white balance value will be set.
4
Frame a white or gray reference object in the
reference object frame.
5
Press the
k
button to measure the white balance value.
• The shutter is released and the new white balance preset value is set (no picture is
recorded).
B
Note on Preset Manual
The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set
White balance to Auto or Flash .
White balance
Flash
Cloudy
Fluorescent
Incandescent
Daylight
Auto
Flash
Cloudy
Fluorescent
Incandescent
Daylight
Auto
Preset manual
Preset manual
Measure
Cancel
Preset manual
Measure
Cancel
Reference object frame