85
Basic Operations of Movie Recording and Movie Playback
Notes About Movie Recording
B
Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the
remaining recording time flashes while images or movies are being saved.
Do not open
the battery-chamber/memory card slot cover or remove the battery or memory
card
while an indicator is flashing. Doing this could result in loss of data, or in damage to the
camera or the memory card.
B
Notes About Recorded Movies
•
The zoom indicator is not displayed during movie recording.
•
There may be some degradation in image quality when digital zoom is used.
•
The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration
reduction, and aperture operation when brightness changes may be recorded.
•
The following phenomena may be seen on the screen while recording movies. These
phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor
lighting.
- Subjects that move quickly from one side of the frame to the other, such as a moving
train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is moved.
•
Depending on the distance to the subject or the amount of zoom applied, colored stripes
may appear on subjects with repeating patterns (fabrics, lattice windows, etc.) during
movie recording and playback. This occurs when the pattern in the subject and the layout
of the image sensor interfere with each other; it is not a malfunction.
B
Notes About Vibration Reduction During Movie Recording
•
When
Movie VR
131) in the movie menu is set to
On (hybrid)
, the angle of view (i.e.,
the area visible in the frame) becomes narrower during movie recording.
•
When using a tripod to stabilize the camera during recording, set
Movie VR
to
Off
to
prevent potential errors caused by this function.
B
Notes About Autofocus for Movie Recording
Autofocus may not perform as expected (
64). Should this occur, try the following:
1. Set
AF area mode
to
Center
and
Autofocus mode
to
Single AF
(default setting) in the
movie menu before starting movie recording.
2. Frame another subject (positioned at the same distance from the camera as the intended
subject) in the center of the frame, press the
b
(
e
) button to start recording, and modify
the composition.
Содержание COOLPIX A900
Страница 16: ...1 Parts of the Camera Parts of the Camera The Camera Body 2 The Monitor 4 ...
Страница 245: ...33 Technical Notes ...