Nikon coolpix A300, Справочное руководство, Страница: 129 / 179

114
Using the Menu
The Network Menu
Re-pairing
Re-pair when pairing the same smart device again after unpairing using End pairing
in the SnapBridge app.
Android Devices with NFC Support
1
Select Connect to smart device in the
network menu, press the
k
button,
and then press the
k
button when the
dialog shown on the right is displayed.
•
An NFC confirmation dialog is displayed.
2
After checking that NFC is enabled on
the smart device, touch the camera
Y
(N-Mark) to the NFC antenna on the
smart device.
•
Launch the SnapBridge app. When the
confirmation dialog for connecting is displayed,
tap
OK .
•
If the SnapBridge download site is displayed,
download and install the app before repeating the above steps.
3
Follow the instructions on page 13, starting with Step 4.
Later
Set
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.