Booking:
1.
When switching off always check the calendar. Users might delete their booking during your
time slot. If that happens to be in the afternoon the system might stay. This is potentially
dangerous and waists the lifetime of the lasers. If you delete your booking please make sure to
warn the previous user!!
2.
When deleting a booking please send an e-mail to the previous/subsequent user and the institute
mailing list.
3.
IN-VIVO experiments can be only started in the AFTERNOON as the drift caused by cooling
and heat within the chamber will affect following users as well.
System Start up:
Step 1.:
Switch on the control computer.
Step 2.:
Power up the laser board by turning the key on the controller front panel of the
laser unit. This will bring the 405nm (Blue) and 561nm (Red) lasers ON. The 488nm
(green) and 647nm (far red) lasers will be in standby mode.