Nikon A1 Скачать руководство пользователя страница 81

Страница: 81 / 88

Chapter 25. Capturing High-Speed Images (Resonant Scanner)

(6) To use Auto Gain, a function that automatically adjusts the detector sensitivity (HV) based on the set rate

of saturated pixels, click the

[AG] button.

“NG” is displayed for channels that failed in Auto Gain and the HV values are returned to the previous

values.

Use the

[Auto Gain setting] button to change the rate of saturated pixels. Set the maximum value

and minimum value of the rate.

Notes:

•

Auto Gain is disabled during scanning.

•

Auto Gain is disabled during 2Ex1Em or 1Ex2Emx2 line sequence.

•

Auto Gain is disabled when line scan is set.

•

Do not make a manual adjustment in the Acquisition window and do not make an adjustment

using the remote controller during Auto Gain.

(7) Apply Line Average as needed.

Average is a function to scan the same image

multiple times and average it to remove

noises.

Select [Line Average/Integrate] - [Average] in

the Scan setting window and select an

average scan frequency in [Count].

Note: Averaging reduces noise, but decreases

the frame rate (number of images

acquirable per second).

(8) Click the

[XY] button to acquire an image.

25.4

Save an image.

Make the image you want to save active and select [File] - [Save As] to save it.

Note: We recommend that the image be saved in nd2 file format. Conditions such as parameters are

also saved.

Содержание A1

























































































Результаты поиска

Содержание A1

Отзывы:

Nikon A1, Инструкция по эксплуатации, Страница: 81 / 88

Результаты поиска

Содержание A1

Отзывы: