Nikon A1 Скачать руководство пользователя страница 74

Страница: 74 / 88

Chapter 24. Capturing Large Images

24.4

Perform the advanced settings of large images.

(1) Set the Z series options.

- None:

Z series is not used.

- Z Series:

The values set in the Z tab of the ND Acquisition dialog box are reflected. (See 24.2)

- Max IP:

Creates the max intensity projection.

- EDF:

Creates an extended depth of focus (EDF) image.

- Z-drive:

Selects a Z device to be used.

- Order:

Selects a combination with Z.

(2) To close the shutter during stage movement, check the [Close active shutter during stage movement]

checkbox.

(3) Set image overlap correction.

- Overlap:

Sets the percentage of image overlap correction.

- No overlap:

Stitches images without image overlap correction.

- Stitching

via:

Selects

how the images are stitched.

- Image registration:

Enables image overlap correction (position correction) when stitching images.

(4) Select whether or not to use shading correction.

- Automatic postprocessing:

Enables automatic post-processing of acquired images.

(5) To acquire multicolor images, set the following options.

- Multichannel capture:

Checking this checkbox acquires multicolor images.

- Optical Conf.:

Selects the optical configuration to be used.

- Stitch using channel:

Selects which wavelength of acquired

to be used as a guideline when

stitching images.

(1)

(5)

(2)

(4)

(3)

Содержание A1

























































































Результаты поиска

Содержание A1

Отзывы:

Nikon A1, Инструкция по эксплуатации, Страница: 74 / 88

Результаты поиска

Содержание A1

Отзывы: