Nikon A1 Скачать руководство пользователя страница 61

Страница: 61 / 88

Live Unmixing

(Spectral Unmixing for Live Image)

Chapter 21. Live Unmixing (Spectral Unmixing for Live Image)

21.1

Set the reference data to be used for spectral unmixing.

(1) Select [Image] - [Spectral Unmixing] from the menu bar to open the Spectral Unmixing Setting window.

(2) Set a spectrum to be used for unmixing from [ROIs]/[Users Defined]/[All] data of [Category] by following

the procedure for “Separating Spectral Image”.

(3) Click the [Cancel] or [Close] button to close the Spectral Unmixing Setting window.

21.2

Perform spectral unmixing for live image.

(1) Click the

[Live] button and adjust

[Laser] (laser power) and [Si HV] (detector

sensitivity) while checking the image.

Note: The Si HV setting is common to all

lasers. Make fine adjustments with the

laser power setting.

(2) Click the

[Live Unmixing] button to switch the Live image to the Unmix Live image.

(3) Click the

[Live Unmixing] button again to return to the Live image.

(2)-1

(2)-2

(3)

Содержание A1

























































































Результаты поиска

Содержание A1

Отзывы:

Nikon A1, Инструкция по эксплуатации, Страница: 61 / 88

Результаты поиска

Содержание A1

Отзывы: