Nikon A1 Скачать руководство пользователя страница 16

Страница: 16 / 88

Chapter 4. Capturing Color Images (Standard Detector)

(5) Click the

[Live] button and adjust [Laser] (laser power) and [HV] (detector sensitivity) while

checking the image.

HV: 4ch

detector

sensitivity

Offset:

Signal cutoff (standard: 0)

Laser: Laser

power

Note: Use Offset “0” as the standard setting.

Note: Using the

[Pixel Saturation Indication] button in the LUTs tab during adjustment makes it

easy to adjust the sensitivity.

Note: If the displayed image is dark, click the

[Auto Scale All] button to adjust the contrast of the

channel automatically to make the image clear.

Note: Turning on and off the [Live] button (scan ON/OFF) during adjustment minimizes fading.

Note: If the LUTs tab is not displayed, right-click the gray area of the software and select

[Visualization Control] - [LUTs] from the displayed menu to call it.

(6) To use Auto Gain, a function that automatically adjusts the detector sensitivity (HV) based on the set rate

of saturated pixels, click the

[AG] button.

“NG” is displayed for channels that failed in Auto Gain and the HV values are returned to the previous

values. Use the

[Auto Gain setting] button to change the rate of saturated pixels. Set the maximum

value and minimum value of the rate.

Notes:

•

Auto Gain is disabled during scanning.

•

Auto Gain is disabled during 2Ex1Em or 1Ex2Emx2 line sequence.

•

Auto Gain is disabled when line scan is set.

•

Do not make a manual adjustment in the Acquisition window and do not make an adjustment

using the remote controller during Auto Gain.

Using the

[Pixel Saturation Indication] button during

adjustment colors the saturation region.

Auto Scale All

Содержание A1

























































































Результаты поиска

Содержание A1

Отзывы:

Nikon A1, Инструкция по эксплуатации, Страница: 16 / 88

Результаты поиска

Содержание A1

Отзывы: