
E
72
The Setup Menu
Re
fere
nce
S
ect
io
n
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (
Select the time allowed to elapse before the camera enters standby mode from
30 s
,
1 min
(default setting),
5 min
, and
30 min
.
d
button
M
z
tab
M
Auto off
C
When the Monitor Has Turned Off to Save Power
•
When the camera is in standby mode, the power-on lamp blinks.
•
If no operations are performed for about three minutes, the camera will turn off automatically.
•
When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button,
c
button, or
b
(
e
movie-record) button
- Rotating the mode dial
C
Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
•
While menus are displayed: 3 minutes (when auto off is set to
30 s
or
1 min
)
•
During slide show playback: Up to 30 minutes
•
When the AC Adapter EH-62F is connected: 30 minutes