
94
G
eneral C
ame
ra S
etup
General Camera Setup
The Setup Menu
From the menu screen, select the
z
tab to display the
setup menu, and then you can change the following
settings.
Press the
d
button
M
z
(setup) tab (
Option
Description
A
Welcome screen
Allows you to select the image displayed as the welcome
screen when the camera is turned on. Select
COOLPIX
to display the COOLPIX logo. Select
Select an image
to
use a picture taken with the camera as the welcome
screen. The welcome screen is not displayed by default.
Time zone and date
Allows you to set settings related to the camera’s date
and time. The
Time zone
setting allows you to specify
the time zone where the camera is mainly used and
whether or not daylight saving time is in effect. When the
travel destination (
x
) is selected, the camera
automatically calculates the time difference between the
travel destination and the home time zone (
w
), and
saves images using the date and time of the travel
destination.
Monitor settings
Allows you to adjust settings related to the monitor.
•
Photo info
allows you to select the kind of
information that is displayed during shooting mode
and playback mode. If you select
Framing grid+auto
info
, a grid is displayed when shooting to help you
frame the shot.
•
Brightness
allows you to adjust the brightness of the
monitor.
Print date
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is
Off
.
•
The shooting date and time are not imprinted on
images captured using
Panorama
or on movies.
Vibration reduction
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is
On
.
•
When using a tripod to stabilize the camera during
shooting, set this feature to
Off
to prevent this feature
from malfunctioning.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction