Nikon 26266, Руководство пользователя

Страница: 44 / 196

32
Using the Flash
Bas
ic Ph
otography an
d Pl
ayba
ck
:
A
(Auto)
M
o
de
B
Shooting When the Flash is Disabled (
W
) or Lighting Is Poor
• Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake.
•
E
may be displayed in the shooting screen. When
E
is displayed, ISO sensitivity is
automatically increased.
• The noise reduction function may be activated with some shooting conditions such as dim
lighting. More time than usual is required to record pictures to which noise reduction is applied.
B
Note on the Flash
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash to
W
(off).
C
The Flash Lamp
The flash lamp indicates flash status when the
shutter-release button is pressed halfway.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try
again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off,
and remain off, until the flash is fully charged.
C
The Flash Mode Setting
The default flash mode setting varies with shooting mode (
A
36).
•
A
(auto):
U
(auto)
• Scene: varies with the selected scene mode (
A
55–63)
•
F
(smart portrait): fixed at
U
(auto) when
Off
is selected for
Blink proof
;
W
(off) when
On
is
selected for
Blink proof
(
A
68)
•
s
(subject tracking):
U
(auto)
There are functions with which the flash cannot be enabled. See “Camera Settings that Cannot Be
Applied Simultaneously” (
A
51) for more information.
The flash mode setting applied in
A
(auto) mode is stored in the camera’s memory even after the
camera is turned off.
C
Red-eye Reduction
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
If the camera detects “red eye” while a picture is being recorded, the affected area will be processed
to reduce red-eye before the picture is saved. Note the followings when shooting.
• More time than usual is required to record pictures.
• Red-eye reduction may not produce the desired results in some situations.
• In extremely rare instances, areas not subject to red-eye may be affected by red-eye reduction
processing; in these cases, choose another flash mode and try again.