Nikon 26212, Руководство пользователя

Страница: 157 / 216

145
Connecting to a Computer
Con
n
e
ct
in
g
to
Te
le
vis
ion
s, Comp
u
te
rs
a
n
d Pr
in
te
rs
Charging While Connecting to a Computer
When connecting the camera to a computer via the supplied USB cable while Auto
(default setting) is selected for the Charge by computer option (
A
168) in the
setup menu, the battery inserted into the camera is automatically charged using
power supplied by the computer.
See “Before Connecting the Camera” (
A
140) and “Transferring Pictures from a Camera
to a Computer” (
A
141) for more information on connecting the camera to a computer.
Power-on Lamp
The following chart explains power-on lamp status when the camera is connected to a
computer.
B
Notes on Charging with Connection to a Computer
• The battery cannot be charged, nor can data be transferred, when the camera is connected to a
computer before the camera’s date and time have been set (
A
22). If the camera’s clock battery
(
A
156) has been exhausted, the date and time must be reset before the battery can be charged
or images can be transferred with connection to a computer. In this case, use the Charging AC
Adapter EH-68P (
A
18) to charge the battery and then set the camera’s date and time.
• If the camera is turned off, charging will also stop.
• If a computer enters sleep mode while charging, charging will stop and the camera may be turned off.
• When disconnecting the camera from a computer, turn the camera off and then disconnect the
USB cable.
• About six hours are required to charge a fully exhausted battery. Charging time increases when
images are transferred while the battery is charging.
• When the camera is connected to a computer, an application installed on the computer, such as
Nikon Transfer, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.
• The camera turns off automatically if there is no communication with the computer for 30 minutes
after the battery has finished charging.
• Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery inserted into the camera via computer connection.
Status Description
Slow blinking (orange) Battery charging.
Glows (green) Battery not charging. Charging is complete when the power-on
lamp stops blinking orange and glows green.
Flickers (orange)
• Operating temperature range exceeded. Charge the battery
indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
• A USB cable is not correctly connected or the battery is faulty.
Reconnect the USB cable correctly or replace the battery.
• Computer is in sleep mode and does not supply power. Reboot
a computer.
• The battery cannot be charged as computer’s specifications or
settings does not support power supply to the camera.