169
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
back
and S
e
tup M
e
nus
i
Sound Settings
Adjust the following sound settings.
k
Auto Off
If no operations are performed for the selected length of time, the monitor will turn
off and the camera will enter standby mode (
17) to reduce the drain on the
battery. The power-on lamp will blink in standby mode. If no operations are
performed for about another three minutes, the camera will turn off automatically.
Press the shutter-release button halfway or the
c
button to exit standby mode.
Choose the time allowed to elapse before the camera enters standby mode. The
time options are
30 s
,
1 min
(default setting),
5 min
, and
30 min
.
B
Notes on Auto Off
The time taken for the monitor to enter standby mode is as follows.
•
Menus are displayed: three minutes
•
Mode dial is set to
G
: three minutes
•
Mode dial is set to
H
: three minutes
•
Using voice recording: 30 seconds
•
Slideshow playback: maximum of 30 minutes
•
AC adapter is connected: 30 minutes
Button sound
Turn button sound
On
(default setting) or
Off
. A beep will sound once when
operations are completed successfully, twice when the camera acquires focus on
the subject, and three times when an error is detected. Start-up sound will also play
when the camera is turned on.
Shutter sound
Choose shutter sound from
On
(default setting) or
Off
.