152
Shooting Options: The Shooting Menu
S
h
ooti
n
g
, Pl
ay
back
and S
e
tup M
e
nus
AF area mode
When
AF area mode
is set to
Center
while
Metering
is set to
Spot AF area
, the
Metering
setting will automatically change to
Matrix
. When a setting other than
Center
is selected for
AF area mode
, the
Metering
setting automatically reverts
back to
Spot AF area
.
Noise reduction
•
When
Auto
of
Noise reduction
is applied with
Continuous
set to an option
other than
Single
or
Intvl timer shooting
, or with
Auto bracketing
set to an
option other than
Off
, noise reduction will not be performed.
•
Selecting
On
for
Noise reduction
changes all modes to
Single
, when an option
other than
Intvl timer shooting
is selected for Continuous, and
Auto
bracketing
is changed to
Off
.
Wide-angle converter
Selecting
On
for
Wide-angle converter
changes the flash mode to
W
(off ).
Distortion control
•
When
Distortion control
is set to
On
,
Continuous
is automatically set to
Single
and
Auto bracketing
is set to
Off
.
•
Even when the
Distortion control
option is changed back to
Off
,
Continuous
will still be set to
Single
and
Auto bracketing
will still be set to
Off
.
•
Distortion control cannot be used if the image quality setting is set to
NRW (RAW)
,
NRW (RAW) + Fine
,
NRW (RAW) + Normal
or
NRW (RAW) + Basic
.
Built-in flash, Speedlights (available separately from Nikon)
Built-in flash and Speedlight SB-400, SB-600, SB-800, or SB-900 flash unit (available
separately from Nikon) operation is restricted, as shown below, depending upon the
applied Continuous setting.
When a flash unit (available separately from Nikon) is mounted on the camera’s
accessory shoe, the built-in flash is automatically set to
W
.
Continuous mode
Built-in flash
Flash units
Single
Available
Available
Continuous
Off
Available
BSS
Off
Not available
Continuous flash
Available
Not available
Multi-shot 16
Off
Available
Intvl timer shooting
Available
Available