
111
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, Playbac
k
an
d S
e
tu
p Me
nus
w
Electronic VR
Specify the electronic vibration reduction setting for shooting still pictures.
When
R
is displayed in the monitor with [Auto] specified, the camera applies
vibration reduction to suit shooting conditions (
B
Note on Electronic VR
•
Electronic VR may not work properly immediately after the camera is turned on or reactivated from
standby mode.
•
Electronic VR does not work when the exposure time is faster than a certain value.
•
Electronic VR is less effective for when pictures are considerably blurred.
•
Blurred subjects cannot be compensated.
D
Electronic Vibration Reduction Icons in Playback Mode
The compensated pictures are marked with the
R
icon in full-frame playback mode. If electronic VR
cannot compensate a blurred picture, the picture is marked with the
Q
icon in full-frame playback
mode (
D
Compensating Movies with Electronic VR
Electronic VR can be enabled for movie recording from [Electronic VR] (
58) in the movie menu
(
h
AF Assist
Enable or disable AF-assist illumination.
Auto (default setting)
The effects of camera shake and blurred subjects are reduced while pictures are
shot under the following conditions:
•
Flash mode is set to
W
or
Y
•
Shutter speed is slow
•
[Single] is selected for the [Continuous] setting
Off
Electronic vibration reduction is not enabled.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. Note that for some scene modes, AF-assist illumination turns off
automatically.
Off
Disable this function. The camera may be unable to focus if lighting is poor.